Porsche 911 w/ 4* MCC

[OCDetails]

This 911 belongs to a friend of a friend and has been on my list of cars to do since last fall. It was in pretty sad shape. It took 4 hours on the nose to do inside and out and everything in between. The process was NXT wash, Clay Magic clay, Four Star Medium Cut Compound w/ PC & Edge 2000 Blue, and Wolfgang Paint Sealant. I've got some video that I need to upload that shows a walk around before and after that really shows off the work a little better, but these show it off pretty well. The only thing I realize I missed is the sun in the hood shot to show the swirl removal there. The 4* MCC did a great job at removing the swirls though. It is one of the great unsung products that is out there. My next order of business should be to write up a review on it. I think Danase.com is one of the last places around that I can get it at.

Before:

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/1-2.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/1-1.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/1.jpg



After:

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-3.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-15.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-17.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-13.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-10.jpg

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-4.jpg

And, of course, the obligitory money shot. :D

http://i172.photobucket.com/albums/w22/OCDetails2007/Porsche%20911/2-5.jpg

[Bob]

That came out sweet Anthony!

[Pete]

Surprising results with just one correction step. Good work :mrgreen:

[OCDetails]

I probably could have used another polish and gotten even better results, but for what he wanted I felt that the MCC was good enough. Someone who was able to let their car get to the condition that it was in isn't going to care about a couple micro swirls left in the surface anyway. He wasn't going to pay me for the extra time to take the job to the next level, so I wasn't able to do what could have been done. Still... it came out pretty darn good. :)