Green pad with...

[mnguyen]

What polishes do everyone use with the green pad on the pc?

[Jose]

Are talking about an LC or Edge pad? They are both completetly different pads.

[mnguyen]

the LC 5" green pad

[Jose]

So far I have only used OC with it, since I use it on the front bumper. Other options are available to use as well with excellent results.

[mnguyen]

should OC or SIP be use on the green or orange LC pad?

[BlueZero]

Depends on the paint and defects. You can pretty much use any polish with the green pad. It depends on how much cut you need. Always try to use the least aggressive product that will get the job done. Hope that helps.

[bunky]

Let's hope Eric at LC can respond. From what I have seen, green is intended for some all in one products. I have one but have not used it yet.

[mnguyen]

is the orange alot more aggressive then the green? or is it about the same? Should i have both or one or the other?

[BlueZero]

Check out this post. It should help clear it up. I was confused also.

http://www.danaseforums.com/forums/viewtopic.php?t=1190&postdays=0&postorder=asc&start=0

[mnguyen]

thanks BlueZero, i guess now i have to get the black and blue pads too

[bunky]

In regards to the "LC" green, at Danase the LC CCS green pad is between white and orange and consistent with the standard Lake Country application charts. At Autogeek, their LC CCS green pad is different and between white and gray.