PDA

View Full Version : Apollo Detailing: Full Correction Imola Red '05 BMW 330ci ZHP


holden_caulfield04
05-14-2008, 12:04 PM
This vehicle was purchased several days prior to it this paint correction. The dealer swirled it quite a bit and applied a type of glaze that hid many of the swirls. It wasn't the worst vehicle I had seen but it did require a multi-step correction.

The weather was overcast and the swirls did not appear until after an IPA wipedown and the sun returned.

Paint Correction Process

-Examine paint condition using dual halogen set-up

-Wash the entire vehicle using the two-bucket method

-Rinse using the sheeting method and dry with waffle weave microfibre

-IPA wipedown to ensure removal of fillers

-Clay with Meguiars Professional Clay and custom formulated spray lubricant

-Re-wash using two-bucket method, sheet-rinse and dry with WW microfibre

-Re-inspect paint using dual halogen set-up

-Tape off a section on the hood to determine the correct method of attack

-Compound with Menzerna PG on Lake Country Yellow Pad

-Polish using Menzerna FP on Lake Country White Pad

-Re-wash using two-bucket method to remove polishing dust and lubricating oils, sheet-rinse and dry with WW microfibre

-Perform inspection of painted surfaces with dual-halogen lighting system

-All painted surfaces and windows sealed with Klasse AIO on Lake Country Black Pad

-Bare hand pure carnauba wax application with Swissvax Saphir

-Kidney grills and chrome window trim sealed with metal restorer

-Plastic/Vinyl/Rubber trim treated with 303 Aerospace Protectant

-Alloy wheels cleaned with Sonax Wheel Gel Cleaner

-Tires dressed with Poorboy's Bold N' Bright

Total time: 12.5 hours




Before shots



http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP001.jpg

Dirt covered the vehicle and, combined with the overcast sky, hid the true condition of the paint.

http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP002.jpg
http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP003.jpg
http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP008.jpg

holden_caulfield04
05-14-2008, 12:05 PM
I proceeded to tape off a section of the hood, wiped down the area with 50/50 and did a test correction.



http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP004.jpg



The area had some significant swirls and determined that a two-step correction, Menzerna PG followed by Menzerna IP would be appropriate.

Continuing with the paint correction...

http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP005.jpg
http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP006.jpg

holden_caulfield04
05-14-2008, 12:19 PM
Clean wheels!


http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP015.jpg

I didn't get any shots during the polish because it was getting late, so it's straight to final finishing.

Paint Correction complete

http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP007.jpg
http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP016.jpg



Observe how my hand bead water after application of Swissvax.


http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP010.jpg

holden_caulfield04
05-14-2008, 12:19 PM
Prior to removal of the wax.



http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP011.jpg



After Swissvax removal.

http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP012.jpg

holden_caulfield04
05-14-2008, 12:20 PM
Prior to pickup by the owner.




http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP014.jpg
http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP016.jpg






The owner admiring the beautiful Imola Red finish on his 2005 BMW 330ci ZHP.




http://i202.photobucket.com/albums/aa135/Holden_Caulfield04/05BM330ZHP017.jpg

holden_caulfield04
05-14-2008, 12:29 PM
http://youtube.com/watch?v=Kv-Rgv5iskY