PDA

View Full Version : How To Choose Your Buffing Pads


Dave
01-31-2010, 03:31 PM
http://4.bp.blogspot.com/_M4WaA9qJZm8/SwDbs_jOxoI/AAAAAAAAABA/op7DYdJBwq0/s320/SonusSFXFoamPadKit



With all the pads on the market today it's easy to get confused as to what pad is what and the aggressiveness level of each pad. They all vary by color, pad design, and level of aggressiveness but it's easy to assume that every color is the same throughout the different manufactures. Although they all might look the same there are differences so hopefully I can help you by knowing what to look for when choosing your buffing pads.


Do not pay attention to the color but do pay attention to the aggressiveness level of the pad.


The Most Common Aggressiveness Levels




Heavy Cutting Pad
Light Cutting Pad
Polishing Pad
Finessing/Finishing Pad
Ultra Soft Waxing Pad
There are other levels in between such as Heavy Polishing, Soft Polishing, and other variables such as Euro Foam and PPI Rating but the list above describes the most common pads to keep it simple. Some other variables are the face design and size of the foam pad, this is where you will have to find what works best for you.


Wool Pads also vary in aggressiveness and size so like foam pads choosing by aggressiveness is key. Keep in mind that some wool pads are actually a blend and can be found in "twisted" or "untwisted" wool as well as a mix of both.


Here are the most common wool pads




Heavy Cutting Wool Pad
Light Cutting Wool Pad
Polishing Wool Pad
Hopefully this helps you in your pad selection so you end up with the pads you want instead of being disappointed to find that you bought a different pad than what you thought it was.