PDA

View Full Version : My Fingers Hurt


Chaney
08-29-2005, 10:43 AM
Well Yesterday i spent a good portion washing, Paint Cleanser, and waxing my car. MY FINGERS HURT when i was done.

I personally think my car still looks like ass because of all teh scratches and paint chips that are on my front bumper, hood, sides of my car, roof and even the rear bumper.

I used all 4* Products.

Washed it with the shampoo, rinsed it for a good 15 minutes with the powerwasher to make sure i got all of the soap off (still soap residue on my car), thus the paint cleanser by 4*. I liked this product, took a little longer to do but did a good job getting the little stuff i missed off the car, and getting the soap residue off it. It also gave a decent shine. Then came the 4* protectant, i still am putting it on a little heavy, but it goes on really easy with your standard foam applicator. I was able to do the whole car in about an hour (putting it on), then taking it off to just about the same amount of time. (it would have been less if i put it on thinner)... But after the 2 coats of wax on wax off (cleanser and wax) my fingers and arms were hurting from the swirl motion and constant pressure on my fingers.

The shine is decent but i am still not happy with the look (again prolly due to me being picky and too many scratches and chips)

Now the questions, what can i use to help aid in the process. I was thinking about a buffer wheel to wax on for both the cleanser and the wax (i own one of these, but have never used it and prolly needs new pads) I have a small orbital buffer but i hate using it because it tends to swirl.

Can i use the buffer to remove wax too or would i be better just useing my microfibers (which i love by the way)

Also what else can i do to prevent chips and scratches (mostly from me driving on dirt roads, no way around that).

Bob
08-29-2005, 10:50 AM
Now the questions, what can i use to help aid in the process. I was thinking about a buffer wheel to wax on for both the cleanser and the wax (i own one of these, but have never used it and prolly needs new pads) I have a small orbital buffer but i hate using it because it tends to swirl.
-
Can i use the buffer to remove wax too or would i be better just useing my microfibers (which i love by the way)
-
Also what else can i do to prevent chips and scratches (mostly from me driving on dirt roads, no way around that).
Go get a Porter Cable Random Orbital Polisher from Lowes. That will be your best detailing investment EVER.
-
I know a guy who uses his buffer to remove the wax but I always do it by hand. The product comes off so easy I just assume use a microfiber by hand.
-
You can by a rock blocker type item www.rockblocker.com for your car to help prevent ships.

wifehatescar
08-29-2005, 04:52 PM
I will be living in South Lyon starting in October (close to Brighton), if you want come by sometime October/November and I will give you a quick PC lesson on what to buy and how to use it. We can try a panel on your car too. (I can do the whole thing for you but then I'd have to charge you :wink: )

PS - I will most likely have a 3 car HEATED garage to work in :D yay me.

Chaney
08-29-2005, 06:54 PM
Wife- let me know..that sounds like a good time.

Also the end of september i think the 24th i am going to have a bunch of the focus guys out at my house and prolly do a clean and ride/ bbq here. I'll post up in events when i have more info, but ya'll welcome...

Bob
08-29-2005, 08:36 PM
Wife- let me know..that sounds like a good time.

Also the end of september i think the 24th i am going to have a bunch of the focus guys out at my house and prolly do a clean and ride/ bbq here. I'll post up in events when i have more info, but ya'll welcome...

Sounds good man!

wytstang
08-29-2005, 09:50 PM
In the mean time you can pick up a pinnacle polishing pal to save your fingers http://www.autogeek.net/pinpp.html I have one comming but the stupid hurricane has delayed it's delivery. This was recommend to me by an autopia member, he said it saves his fingers and cut his waxing time in half.

The Pad Man
09-21-2005, 10:22 AM
The polishing pal works awsome. Just switch pads between products, plus, if you get the claying disc, you can clay a car without using the pressure from your fingers. I usually use a paste wax and apply it my hand, then use a white polishing pad to work it on the vehicle, then wipes off residue with a QD and a microfiber.

Bob
09-21-2005, 10:29 AM
The polishing pal works awsome. Just switch pads between products, plus, if you get the claying disc, you can clay a car without using the pressure from your fingers. I usually use a paste wax and apply it my hand, then use a white polishing pad to work it on the vehicle, then wipes off residue with a QD and a microfiber.
any chance in LCM coming up with a similar product? :)

The Pad Man
09-21-2005, 10:38 AM
Bob,

Can you PM me?

Bob
09-26-2005, 08:48 AM
The polishing pal works awsome. Just switch pads between products, plus, if you get the claying disc, you can clay a car without using the pressure from your fingers. I usually use a paste wax and apply it my hand, then use a white polishing pad to work it on the vehicle, then wipes off residue with a QD and a microfiber.
I totally agree! I used one this weekend and loved it!

Bob
09-29-2005, 01:58 PM
We just ordered a bunch of these so we should see them in about a week and will get them on our site.

Bob
10-03-2005, 04:40 PM
I used the Pad Pal this weekend for claying the hood, top, and trunk of a car and it worked out pretty dang good.

3Dog`
01-31-2006, 10:36 AM
Malm's has a great one also. It has more of a stick shift handle. They have yellow pads for it but I just put a Cyclo pad holder on mine and use any 4" foam.