Russecu
12-07-2006, 05:54 PM
Here is what I had to work on. I tried chemical Klasse AIO first then I resorted to a mix of 25% Optimum Polish and 75% Poli-seal that I have seen someone else use. I liked the results better with the mix. The truck probrably hasn't been waxed in forever considering the oxidation. The before pic is after I clayed it. The paint is nowhere from perfect but I could tell in spots that it had thin single stage paint so I didn't get too aggressive.
Wash: Meguiars Gold Class with LC mitt
Clay: Sonus Medium Cut this seemed to break apart more quickly than other clay I have used
Polish: 75/25 OP/OPS via PC and White LC pad
Glaze: Meg #7 ( I have read that Meg. is good to use on SS paint and I figured the oils in the glaze would help the paint some.
Wax: Meg. #16 x 2
Wash: Meguiars Gold Class with LC mitt
Clay: Sonus Medium Cut this seemed to break apart more quickly than other clay I have used
Polish: 75/25 OP/OPS via PC and White LC pad
Glaze: Meg #7 ( I have read that Meg. is good to use on SS paint and I figured the oils in the glaze would help the paint some.
Wax: Meg. #16 x 2